Stopped up sinks are usually caused by an accumulation of your hair, grease or other waste lodged someplace close to the drain. Take action right away whenever a drain empties more gradually than normal and you could prevent contacting a plumbing technician due to a complete clog up, which might be considerably more challenging to clear.
In case of a slow drain or a complete block, first, unload the sink. Pour in liberal portions of boiling water. This can melt the blockage. Do not use this process on plastic water lines. You can also look for grease trap cleaning services in Dublin.
Image Source: Google
Take out the drain stopper or strainer. Many washbasins have pop-up stoppers which can be removed by just yanking them up. On a few models, you will need to reach below the sink and remove a nut that retains the full control.
Plug up the overflow opening with a damp cloth or have somebody hold his hand firmly against it. This helps prevent air from getting drawn in or water removed when you plunge. Run a good inch or two of water into your basin. Or bail out the backed-up water leaving an inch or two.
The water should really just cover up the plunger cup. Next, place the cup over the drainage and force down, slanting the cup as you do to dispose of trapped air. Powerfully pump the plunger up and down approximately ten times to make an increase in the water caught in the drain.
